Specifications retain each model’s original units and operating conditions. Alternatives in a row do not necessarily form one configuration. Missing values are marked; follow the product link for full specifications and ordering options. Scroll the table horizontally on mobile.
Pressure Ranges (DIN EN 837-1): 0 – 0.6 bar to 0 – 1 000 bar for type – 3 (0 – 10 psi to 0 – 15 000 psi) 0 – 0.6 bar to 0 – 600 bar for type – 1 (0 – 10 psi to 0 – 10 000 psi)
Not specified
Process Connection: G 1⁄4 B (1⁄4" BSP)
Accuracy (DIN EN 837-1): Class 1.6 Class 2.5 for pressure ranges 0 – 600 bar and 0 – 1 000 bar (0 – 10 000 psi and 0 – 15 000 psi)
Case: With polished crimped-on ring, stainless steel 304 (1.4301) Degree of Protection (DIN EN 60 529 / IEC 529) IP54 IP65 for model RChgG with closed blow-out plug
Blow-out Device: Blow-out plug at the top of the case coverage
Case Ventilation: Via blow-out plug, ventilation required for internal pressure com- pensation for measuring spans ≤ 10 bar, and also recommended for other pressure ranges if the operating conditions permit
Case Filling: Model RChgG: glycerin
Nominal Case Size: 63 mm (2 1⁄2")
Wetted Parts: Type – 3: connection: stainless steel 316L (1.4404) Bourdon tube: stainless steel 316L (1.4404) gas-shielded arc welding ≤ 60 bar (800 psi) c-form 100 bar helical form ≥ (1 500 psi) Type – 1: connection: brass Bourdon tube: bronze ≤ 40 bar (600 psi) c-form soft-soldered ≥ 60 bar (800 psi) helical form silver brazed
Case Configuration: Connection: screwed Position of the connection: - bottom connection - lower back connection (r) / centre back connection (rm) Mounting device: - without - back flange for surface mounting (Rh) - front flange for panel mounting (Fr) - u-clamp for panel mounting (BFr)
Window: Polycarbonate for type – 3 Instrument glass for type – 1
Movement: Stainless steel for type – 3 Brass / German silver for type – 1
Dial: Aluminum white, scale black
Pointer: Aluminum black
Safety Category According to DIN EN 837-1: S1 pressure gauges with blow-out device S2 safety pressure gauge, proved: RChg 63 – 3 up to 1 000 bar (15 000 psi) RChgG 63 – 3 up to 600 bar (10 000 psi) optional: type – 1 with laminated safety glass or polycarbonate
Pressure Ranges (DIN EN 837-1): 0 – 0.6 bar to 0 – 1600 bar (0 – 10 psi to 0 – 20 000 psi) for type – 3 0 – 0.6 bar to 0 – 1000 bar for type – 1 (0 – 10 psi to 0 – 15 000 psi)
Not specified
Process Connection: G 1⁄2 B (1⁄2" BSP)
Accuracy (DIN EN 837-1): Class 1.0
Case: With bayonet ring, stainless steel 304 (1.4301) Degree of Protection (DIN EN 60 529 / IEC 529) IP54 IP65 for m odel RChG 100 and model RChG 160 (measuring spans ≥ 2.5 bar)
Blow-out Device: Model RCh blow-out plug in the back of the case, Ø 1" (25 mm) Model RChG 100 b low-out plug in the back of the case, Ø 40 mm (1 1⁄2") Model RChG 160 b low-out device at the top of the case coverage
Case Ventilation: Model RChG 100 w ithout ventilation, but with internal pressure compensation via pressure equalising membrane Model RChG 160 via blow-out device
Case Filling: Model RChG: glycerin
Nominal Case Size: Model RCh: 100, 160, 250 mm (4, 6, 10") Model RChG: 100, 160 mm (4, 6")
Wetted Parts: Type – 3: connection: stainless steel 316L (1.4404) Bourdon tube: stainless steel 316L (1.4404) gas-shielded arc welding ≤ 40 bar (600 psi) c-form ≥ 60 bar (800 psi) helical form 1600 bar (20 000 psi) NiFe-alloy helical form Type – 1: connection: brass Bourdon tube: ≤ 40 bar (600 psi) bronze, c-form soft-soldered ≥ 60 bar (800 psi) s tainless steel 316L (1.4404)
Case Configuration: Connection: screwed Position of the connection: - bottom connection - lower back connection (r) Mounting device: - without - back flange for surface mounting (Rh) - front flange for panel mounting (Fr)
Window: Laminated safety glass for type – 3 Instrument glass for type – 1
Movement: Stainless steel for type – 3 Brass / German silver for type – 1
Dial: Aluminum white, scale black
Pointer: Aluminum black
Safety Category According to DIN EN 837-1: S1 pressure gauges with blow-out device NCS 100 (4")
Pressure Ranges (DIN EN 837-1): 0 – 0.6 bar to 0 – 1000 bar for type – 3 (0 – 10 psi to 0 – 15,000 psi) 0 – 0.6 bar to 0 – 600 bar (0 – 10 psi to 0 – 10,000 psi) for type – 1
Not specified
Process Connection: G 1⁄4 B (1⁄4" BSP)
Accuracy (DIN EN 837-1): Class 1.6 Class 2.5 for pressure ranges 0 – 600 bar and 0 – 1000 bar (0 – 10,000 psi and 0 – 15,000 psi)
Case: With bayonet ring, stainless steel 304 (1.4301) Degree of Protection (DIN EN 60 529 / IEC 529) IP54 IP65 for model RChG with closed blow-out plug
Blow-out Device: Blow-out plug at the top of the case coverage
Case Ventilation: Via blow-out plug, ventilation required for internal pressure com- pensation for measuring spans ≤ 10 bar, and also recommended for other pressure ranges if the operating conditions permit
Case Filling: For model RChG: glycerin
Nominal Case Size: 63 mm (2 1⁄2")
Wetted Parts: Type – 3: connection: stainless steel 316L (1.4404) Bourdon tube: stainless steel 316L (1.4404) gas-shielded arc welding 60 bar c-form ≤ (800 psi) ≥ 100 bar (1,500 psi) helical form Type – 1: connection: brass Bourdon tube: bronze ≤ 40 bar (600 psi) c-form soft-soldered 60 bar helical form ≥ (800 psi)
Case Configuration: Connection: screwed Position of the connection: - bottom connection - lower back connection (r) / centre back connection (rm) Mounting device: - without - back flange for surface mounting (Rh) - front flange for panel mounting (Fr)
Window: Laminated safety glass for type – 3 Instrument glass for type – 1
Movement: Stainless steel for type – 3 Brass / German silver for type – 1
Dial: Aluminum white, scale black
Pointer: Aluminum black
Safety Category According to DIN EN 837-1: S1 pressure gauges with blow-out device S2 safety pressure gauge, proved: RCh 63 – 3 up to 1000 bar (15,000 psi) RChG 63 – 3 up to 600 bar (10,000 psi) optional: type – 1 with laminated safety glass or polycarbonate
Pressure Range (DIN EN 837-1): 0 – 1 bar to 0 – 600 bar (0 – 15 psi to 0 – 10 000 psi)
Not specified
Process Connection: G 1/4 B, 1/4" NPT, G 1/8 B or 1/8" NPT
Accuracy (DIN EN 837-1): Class 1.6 Class 2.5 for pressure range 0 – 600 bar (0 – 10 000 psi)
Case: With polished crimped-on ring, stainless steel 304 (1.4301) Degree of Protection (DIN EN 60529 / IEC 60529) IP54 IP65 for model RChgG with closed blow-out plug
Blow-out Device: Blow-out plug at the top of the case coverage
Case Ventilation: Via blow-out plug, ventilation for internal pressure compensation, required for measuring spans ≤ 10 bar psi), and also recom- (≤ 160 mended for other pressure ranges if the operating conditions permit
Case Configuration: Connection screwed Position of the connection - bottom connection - centre back connection (rm) Mounting device - without - for centre back connection - front flange for panel mounting (rmFr) - u-clamp for panel mounting (rmBFr)
Window: Polycarbonate
Movement: Stainless steel
Dial: Aluminum white, scale black
Pointer: Aluminum black
Safety Category According to DIN EN 837-1: S1 pressure gauges with blow-out device
Pressure Range (DIN EN 837-1): 0 – 0.6 bar to 0 – 1 600 bar (0 – 10 psi to 0 – 20 000 psi) for type – 31) 0 – 0.6 bar to 0 – 1 000 bar (0 – 10 psi to 0 – 15 000 psi) for type – 1
Not specified
Process Connection: G 1/2 B, 1/2" NPT or M 20x1.5
Accuracy (DIN EN 837-1): Class 1.0
Case: With bayonet ring, stainless steel 304 (1.4301) Degree of Protection (DIN EN 60529 / IEC 60529) IP54 IP65 for model RSChG
Blow-out Device: Blow-out back; when pressure increases in the case, the entire case back separates, allowing full relief
Case Ventilation: Model RSChG without ventilation, but with internal pressure compensation via pressure equalising membrane
Case Filling: Model RSChG glycerin
Nominal Case Size: 100, 160 mm (4, 6")
Wetted Parts: Type – 3 connection stainless steel 316L (1.4404) Bourdon tube stainless steel 316L (1.4404) gas-shielded arc welding ≤ 40 bar (600 psi) c-form ≥ 60 bar helical form (800 psi) 1 600 bar NiFe-alloy (20 000 psi) helical form Type – 1 connection brass Bourdon tube ≤ 40 bar (600 psi) bronze, c-form soft-soldered
Case Configuration: Connection screwed Position of the connection - bottom connection - lower back connection (r) (for model RSCh 100 – 3) Mounting device - without - back flange for surface mounting (Rh) - front flange for panel mounting (Fr)
Window: Laminated safety glass 1) pressure ranges > 1 600 bar (> 20 000 psi) according to DIN 16001 see data sheet 1640
Movement: Stainless steel
Dial: Aluminum white, scale black
Pointer: Aluminum black
Safety Category According to DIN EN 837-1: S3, safety pressure gauge with break-proof solid front and blow-out back marking , see schematic drawing on page 2